Battery Chargers

GT Digital Battery Volt Meter for 1-6s batteries.

Allows you to measure voltage of each individual cell as well as total voltage. LED display alternates through each cell's voltage and then displays total pack output. This will tell you remaining battery capacity and if battery is out of balance. Portable for use at the field.

Direct fit with Fusion-Pack, Align, Air Thunder, and Kong.

Estimate: How much remaining battery capacity:
4.20v = 100%
4.03v = 76%
3.86v = 52%
3.83v = 42%
3.79v = 30%
3.70v = 11%
3.6?v = 0%

Note: Negative terminal is on bottom when LED is facing you.

Large image of voltage meter (new window)

This adapter allows the charging of Lipo batteries through the balancing tab. Connect adapter to Align/Fusion-Pack style balance plug, and connect Deans connector to a Lithium charger.

NOTE: If using this adapter to charge Lipo transmitter batteries, it is recommended by radio manufacturers to remove battery from radio before charging. When leaving the battery in always turn OFF the radio before charging Lipo battery, and do NOT charge through the transmitter or use the wall charger included with your radio to charge Lithium batteries.

G.T. POWER V5 BALANCER CHARGER/DISCHARGER

Features:
- Blue back-light LCD
- 1-5s internal balancer
- Input power cable (input range from 11-18V)
- Normal, fast, and storage charge modes
- Temperature probe (included)

Specifications:
Operating voltage range: 10.0-18.0 volts
Circuit power: Max 50W
Charge current range: 0.1-5.0-amps
Current drain for balancing Li-Po: 200mAh/cell
NiCd/NiMH battery cell count: 1-14 cells
Li-ion/Polymer battery cell count: 1-5 series
Pb battery voltage: 6-12 volts
Net weight: 280-grams
Dimensions: 130×80×23mm

Balancing tab type:  Fusion-Pack, Align, and Esky

Included:
-Temp probe
-JST, glow plug, RX plug, and alligator clip charge connectors

Required:
10-18 volt power source

A5 closeup image (new window)
A5 large image (new window)
A5 internal balancer (new window)
A5 included connectors (new window)

12-VOLT POWER SUPPLY FOR V5 & A6 CHARGERS

Plug and play with V5 and A6 chargers if you don't have an existing 12-volt source.

Specifications:
Input voltage range: 100-240 volts AC
Frequency & load: 50/60 Hz 1.5-amp draw max
Output: 12-volts 5-amps max

GT 12-volt adapter large image (new window)

"X" Charger 1-6s Li-ion/LiFE/LiPoly balance charger. A123 compatible.