Speed controllers

Turnigy 10-amp 9-gram ESC

Cont current: 10A
Burst current: 12A
BEC mode: linear
BEC : 5v / 2A
Lipo cells: 2-4
NiMH cells: 5-12
Weight: 9-grams
Size: 27x17x6mm

10-amp ESC (new window)

Turnigy 12-amp 13-gram ESC

Cont current: 12A
Burst current: 15A
BEC mode: linear
BEC : 5v / 2A
Lipo cells: 2-4
NiMH cells: 5-12
Weight: 12-grams
Size: 32x24x10mm

12-amp ESC (new window)

Turnigy ESC programming card without motor.

ESC & programming card (new window)

Turnigy 12-amp ESC w/BEC (2-amp 5v), and ESC programming card.

ESC & programming card (new window) (10-amp ESC shown)

Turnigy 1650Kv motor with bullet connectors, Turnigy 12-amp ESC w/BEC (2-amp 5v), and ESC programming card. This motor is closely equivalent to the AXI 2208-26 1420Kv, and bolts right into the MaxiR and Ricco using stock pinions.

Motor large image (new window)
ESC & programming card (new window) (10-amp ESC shown)
Motor mounted on Ricco (new window)

Turnigy 1900Kv motor with bullet connectors, Turnigy 12-amp ESC w/BEC (2-amp 5v), and ESC programming card. This motor is closely equivalent to the AXI 2208-20 1820Kv, and bolts right into the MaxiR and Ricco using stock pinions.

Only use the 1900Kv motor and 12-amp Turnigy ESC for sport and basic 3D flying, as hard 3D may pull more than the 15-amp burst rating

Motor large image (new window)
ESC & programming card (new window) (10-amp ESC shown)
Motor mounted on Ricco (new window)

Y-UFO 6-amp Jeti ESC with low-voltage LED indicator. Max burst 12-amp for 30-seconds. Weight 16-grams.

ESC - gyro - mixer board (new window) 

New Y-UFO 6-amp Jeti ESC. Max burst 12-amp for 30-seconds. Weight 16-grams.

ESC - gyro - mixer board (new window)

YGE 18-amp ESC specifications:

2S-4S Lipo or 6-12 cell NiMH
switching 5.5-volt BEC 2-amp cont 4-amp peak
governor mode
soft-start
adjustable brake mode or free-wheel
automatic or 6-step adjustable timing
switching rate 8 to 16kHz
weight 14-grams

(Large image - new window)

YGE ESC programming card. Allows programming of all parameters on YGE ESC including:

Lipo cut-off voltage
PWM frequency
brake modes
governor
throttle calibration
start-up speed
start-up power

Programming card (new window)