My Account You are not logged in
Login

Categories

Currency

Change Currency

American Dollar

Top Sellers

Featured Products

Information

VX Gimbal System

Page 1 of 1

HDMI2AV HDMI to AV adapter for Sony Nex5 and Canon 5D Mark II

HDMI2AV HDMI to AV adapter for Sony Nex5 and Canon 5D Mark II
sku: HDMI2AV-NEX5


Super Light FPV HDMI to AV Converter Module for Sony Nex5 Cameras

Descriptions:
This is the smallest HDMI to AV adapter designed for SONY NEX5 series. Perfect fit with your camera. Ultra light, only 3.3g.  Also will work with Canon 5D Mark II. 

NOTE:
The output extension wire not include. Depend on different output device, you need choice specification wire and weld by your self. Example (check pictures below).

Specifications:
-Weight: 3.3g
-Size: 50x15mm
- Input:  HDMI is digital, camera only require to have HDMI out.
-Video output: PAL (so make sure your monitor or display component is compatible with PAL)


BEFORE you use this module,pleas set the HDMI output mode on your NEX5 to "Auto",or the module won't work!!

Image1

Price : US$49.95

Out of stock order

Hyper Thin Mini HDMI to HDMI

Hyper Thin Mini HDMI to HDMI
sku: HTM08-BLACK


Super thin and flexible mini hdmi to hdmi cable for your Nex5 or other camera uses mini hdmi for brushless gimbal.

    • Full HD 1080p+
    • 8K resolution
    • HDMI ver 1.4
    • 7.1 channel digital surround audio
    • >15.8Gps HD bandwidth
    • 240Hz video image refresh
    • 48-bit color
  • 75% thinner than other HDMI cables and 35% thinner than our nearest competitor (Monster SuperThin)
  • 4 times more flexible than other HDMI cables
  • A single cable for stunning high definition digital video and multi-channel digital audio
  • 24K gold contacts for signal integrity
Large image

Price : US$15.95

order

I Power 4006 130 turns prewounded w/ connector

I Power 4006 130 turns prewounded w/ connector
sku: GBM4006-130T-XH


Prewounded with 130turns .21mm copper wire.

Replacement motor for VX5N gimbal, connector installed.



Price : US$37.95

order

I Power 4006 150 turns prewounded

I Power 4006 150 turns prewounded
sku: GBM4006-150T


Prewounded with 150turns .21mm copper wire.

Shaft size: 3.17mm
Size: 4006
Bottom mounting holes:  16 and 19mm center to center
Top mounting holes:  12mm center to center

18awg 450mm long output wire.

Camera range: 400-800grams

NOW WITH SHORT SHAFT, WILL INCLUDE LONG SHAFT. 

Price : US$35.95

order

M3 Damper

M3 Damper
sku: M3-DAMPER


Female M3 vibration damper, M3 thread on both end.  Replacement for VX5N brushless gimbal.

1 pcs



Price : US$2.00

order

Upgrade VX5N to Version 2 kit

Upgrade VX5N to Version 2 kit
sku: VX5N-V2-UPGRADE


Upgrade your VX5N to version 2 kit

Features:
- Camera plate increase size to 165mmX75mm
- Bigger roll motor with bigger bearing support
- Carry Nex5,6,7, Black Magic camera

Included:
1x  Longer aluminum roll bar
2x G-10 side arm
1x Camera cage
1x Aluminum bearing hub
1x 4008-150t hollow shaft motor

Image1

Price : US$149.95

Out of stock order

VX5N 2 axis Brushless Gimbal for Sony Nex5/6/7, Black Magic (Version 2) RTF

VX5N 2 axis Brushless Gimbal for Sony Nex5/6/7, Black Magic (Version 2) RTF
sku: VX5N-V2-2X-C


FREE PRIORITY MAIL SHIPPING FOR USA.

Now included the new 32-bit board from Alex Mos, increase stability and compact all in one 3 axis board.  With a 2nd IMU on the frame of the gimbal now allow you to move gimbal in any degree or direction without loosing stability.

Ready to go 2 axis brushless gimbal featuring Alex Mos. Design to work with all Sony Nex5, Nex6, Nex7, Black Magic models with 18-55mm and 16mm lens.  This also can carry two GoPro.  Construct with 3mm G-10 and 5mm aluminum to get maximum stiffness.  This is a complete 2 axis gimbal built, partially tuned for Sony Nex5, some fine tune might need to achieve best result.

Version 2 updates:  Roll motor update to 4008-150t hollow shaft with bigger bearing, camera plate dimension extend to 165mm X 75mm (V1 was 135mm X 70mm).  Top plate has pre drill hole to upgrade to 3rd axis.

Specifications:
Camera plate width:  165mm
Camera height:  75mm
Gimbal height: 150mm
Total Gimbal weight:  420 grams ready to go
Top Mounting holes:  80x80mm plate, slot every 10mm, m3 screw

Included:
1x  Camera Gimbal
6x  M3 vibration damper
1x  4006 150turns motors
1x  4008 150 hollow shaft
1x  Simple BGC board from Alex Mos
- Pretune with preset values.

Required:
2-3s Lipo to power controller (best with 3s 900mah or above).
Does not required flight controller gimbal output, can work as a stand alone unit.

Disclaimers:  Please understand this does not correct vibration, it can only correct movement and shake.  Your aircraft must be extremely well balance, props, motors even the frame must be strong in order to get good result.

Customer video: http://vimeo.com/87368710

Videos:  All video is RAW, no software stabilization was use.
Carrying a GoPro3:    http://www.youtube.com/watch?v=k2cGRJHWwxQ
2nd view:  http://www.youtube.com/watch?v=r1nNAkdkxwA

Nex5 18-55mm:  http://www.youtube.com/watch?v=PQGetLNXwpw
Nex5 Horizon test, fix horizon issue:  http://www.youtube.com/watch?v=bhw0A98odWo
Nex5 at local lake:  http://www.youtube.com/watch?v=ssXHVB7joUM
Camera Balancing:  http://www.youtube.com/watch?v=D9u6GTOnJnk

Multirotors Forum Thread;  http://www.multirotorforums.com/showthread.php?8979-My-brushless-gimbal-result

Note:  For HDMI video output, if you're using 18-55mm lens, you can use the HyperThin cable we have listed  If you're using 16mm lens, then you will need to surgery the HyperThin mini hdmi plug to make it smaller.  You can also buy the HDMI adapter from our Brushless Accessories page.

Image1

Manual


Price : US$599.00

order

VX5N 3 axis Brushless Gimbal for Sony Nex5/6/7, Black Magic (Version 2) RTF

VX5N 3 axis Brushless Gimbal for Sony Nex5/6/7, Black Magic (Version 2) RTF
sku: VX5N-V2-3X-C


FREE PRIORITY MAIL SHIPPING FOR USA.

Now included the new 32-bit board from Alex Mos, increase stability and compact all in one 3 axis board.  With a 2nd IMU on the frame of the gimbal now allow you to move gimbal in any degree or direction without loosing stability.

Ready to go 3 axis brushless gimbal featuring Alex Mos. Design to work with all Sony Nex5, Nex6, Nex7, Black Magic models with 18-55mm and 16mm lens.  This also can carry two GoPro.  Construct with 3mm G-10 and 5mm aluminum to get maximum stiffness.  This is a complete 2 axis gimbal built, partially tuned for Sony Nex5, some fine tune might need to achieve best result.

Version 2 updates:  Roll motor update to 4008-150t hollow shaft with bigger bearing, camera plate dimension extend to 165mm X 75mm (V1 was 135mm X 70mm).  Top plate has pre drill hole to upgrade to 3rd axis.

Specifications:
Camera plate width:  165mm
Camera height:  75mm
Gimbal height: 150mm
Total Gimbal weight:  560 grams ready to go
Top Mounting holes:  80x80mm plate, slot every 10mm, m3 screw

Included:
1x  Camera Gimbal
6x  M3 vibration damper
1x  4006 150turns motors
1x  4008 150 hollow shaft
1x 4114-150t for Pan
1x  Simple BGC board from Alex Mos
- Pre tuned with preset values.

Required:
2-3s Lipo to power controller (best with 3s 900mah or above).
Does not required flight controller gimbal output, can work as a stand alone unit.

Disclaimers:  Please understand this does not correct vibration, it can only correct movement and shake.  Your aircraft must be extremely well balance, props, motors even the frame must be strong in order to get good result.

Customer video: http://vimeo.com/87368710
Videos:  All video is RAW, no software stabilization was use.
Carrying a GoPro3:    http://www.youtube.com/watch?v=k2cGRJHWwxQ
2nd view:  http://www.youtube.com/watch?v=r1nNAkdkxwA

Nex5 18-55mm:  http://www.youtube.com/watch?v=PQGetLNXwpw
Nex5 Horizon test, fix horizon issue:  http://www.youtube.com/watch?v=bhw0A98odWo
Nex5 at local lake:  http://www.youtube.com/watch?v=ssXHVB7joUM
Camera Balancing:  http://www.youtube.com/watch?v=D9u6GTOnJnk

Multirotors Forum Thread;  http://www.multirotorforums.com/showthread.php?8979-My-brushless-gimbal-result

Note:  For HDMI video output, if you're using 18-55mm lens, you can use the HyperThin cable we have listed  If you're using 16mm lens, then you will need to surgery the HyperThin mini hdmi plug to make it smaller.  You can also buy the HDMI adapter from our Brushless Accessories page.

Image1  Image2  Image3

Manual


Price : US$799.00

order

VX5N Brushless Gimbal 3rd Axis add-on with controller

VX5N Brushless Gimbal 3rd Axis add-on with controller
sku: VX5N-3rd-Combo


Hardware and 3rd axis expansion board to upgrade your 2 axis VX5N gimbal to 3 axis.

Features:
- Add 20mm of height to over all gimbal
- About 180grams total
- Motor will have added collar+C-clip on the bottom to support weight.
- Included IMU cable only work with ViaCopter board, so make sure you have ViaCopter board (if not, please contact us for further instruction).
- Iflight 4114-120t motor with ezo bearings.
- You will need to reuse old top plate, will include a template so you can drill the top four hole to mount onto the motor.


Included:
- All hardware
- ViaCopter 3rd axis expansion
- IMU cable
- 4114 motor

Required:
- 3 and 4mm drill bit
- Some drilling

Image1,   Image2   Image3

Board Installation Manual


Price : US$199.00

Out of stock order

VX5N Brushless Gimbal with motors

VX5N Brushless Gimbal with motors
sku: VX5N-M


Completely built gimbal with tilt/roll motors installed (4006-130turns).  NO controller! 

Required:  Alex Mos controller board or similar. 

Disclaimer:  We can not guarantee how well it will work if not use with Alex Mos controller board, please buy at your own responsibility.

Included:
1x  Fully built gimbal
6x  M3 vibration damper
2x  4006 130turns motors with JST-XH plug

Image1  Image2   Image3

Camera Balancing:  http://www.youtube.com/watch?v=D9u6GTOnJnk

Price : US$325.00
Retail Price : US$399.95

order




[1]